Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Sub Graphtec WR7700 Feed & Wander (1 year) CAL VER
DATE:                  22-Sep-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.3 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       6
NUMBER OF LINES:       106
=============================================================================
# Compatibility: 5500/CAL 4.0 or MET/CAL 4.0 or later.
#
# Subprocedures: None
#
# Required Files: None
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5500A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  DISP         {Procedure not formally tested with UUT.}
  1.001  DISP         {See procedure README file.}
  1.002  ASK-                          J                          F        W
  1.003  ASK+           K
  1.004  HEAD         {PAPER FEED}
  1.005  DISP         Press the MODE key to select the DIR Y-T mode.
  1.005  DISP
  1.005  DISP         Press the PLOT key (F1) to recall the PLOT menu, and
  1.006  SET          GRID        : 10mm fine
  1.006  SET          CHART SPEED : 10mm/s
  1.007  DISP         Press the START/STOP key to feed the paper.
  1.007  DISP         With 35 to 40cm of paper fed, press the START/STOP key
  1.007  DISP         to stop the paper feed.
  1.008  HEAD         PAPER FEED: {10mm/s}
  1.009  MESS         Using the GLASS SCALE, measure the grid (scales) on
  1.009  MESS         the recording paper.
  1.009  MESS
  1.009  MESS         The 30cm of paper should be 300mm +/-5mm.
  1.009  MESS
  1.010  MATH         S[1] = "Grid is 300mm +/-5mm."
  1.011  EVAL   -s S[1] : Does the grid measure 300mm +/-5mm?
  2.001  HEAD         PAPER FEED: {20mm/s}
  2.002  SET          CHART SPEED : 20mm/s
  2.003  DISP         Press the START/STOP key to feed the paper.
  2.004  DISP         With 75 to 80cm of paper fed, press the START/STOP key
  2.004  DISP         to stop the paper feed.
  2.005  MESS         Using the GLASS SCALE, measure the grid (scales) on
  2.005  MESS         the recording paper.
  2.005  MESS
  2.005  MESS         The 60cm of paper should be 600mm +/-10mm.
  2.005  MESS
  2.006  MATH         S[1] = "Grid is 600mm +/-10mm."
  2.007  EVAL   -s S[1] : Does the grid measure 600mm +/-10mm?
  3.001  HEAD         PAPER FEED: {50mm/s}
  3.002  SET          CHART SPEED : 50mm/s
  3.003  DISP         Press the START/STOP key to feed the paper.
  3.004  DISP         With 165 to 175cm of paper fed, press the START/STOP key
  3.004  DISP         to stop the paper feed.
  3.005  MESS         Using the GLASS SCALE, measure the grid (scales) on
  3.005  MESS         the recording paper.
  3.005  MESS
  3.005  MESS         The 150cm of paper should be 1500mm +/-25mm.
  3.005  MESS
  3.006  MATH         S[1] = "Grid is 1500mm +/-25mm."
  3.007  EVAL   -s S[1] : Does the grid measure 1500mm +/-25mm?
  4.001  HEAD         PAPER FEED: {100mm/s}
  4.002  SET          CHART SPEED : 100mm/s
  4.003  DISP         Press the START/STOP key to feed the paper.
  4.004  DISP         With 350 to 400cm of paper fed, press the START/STOP key
  4.004  DISP         to stop the paper feed.
  4.005  MESS         Using the GLASS SCALE, measure the grid (scales) on
  4.005  MESS         the recording paper.
  4.005  MESS
  4.005  MESS         The 300cm of paper should be 3000mm +/-50mm.
  4.005  MESS
  4.006  MATH         S[1] = "Grid is 3000mm +/-50mm."
  4.007  EVAL   -s S[1] : Does the grid measure 3000mm +/-50mm?
  5.001  MESS
  5.002  RSLT         =
  5.003  HEAD         {CHART WANDER}
  5.004  DISP         Press the MODE key to select the DIR Y-T mode.
  5.004  DISP
  5.004  DISP         Set the CHART SPEED in the PLOT menu to 10 mm/S.
  5.004  DISP
  5.004  DISP         Press the START/STOP key to start paper feed.
  5.004  DISP
  5.004  DISP         After approximately 30 cm of paper is fed,
  5.004  DISP         feed an additional 1 m and then stop the paper feed.
  5.005  DISP         Measure the distance from the edge of the paper
  5.005  DISP         to the grid line at the location where the 1m of
  5.005  DISP         paper length STARTS.
  5.006  MEMI         Enter the distance (in mm).
  5.007  MATH         MEM1 = MEM
  5.008  DISP         Now measure the distance from the edge of the paper
  5.008  DISP         to the grid line at the location where the 1m of
  5.008  DISP         paper length ENDS.
  5.009  MEMI         Enter the distance (in mm).
  5.010  MATH         MEM = MEM1 - MEM
  5.011  ACC          0.00mm         0.15U
  5.012  MEME
  5.013  MEMC         mm             1.5U
  6.001  END